Factory Maintenance Agreement

Factory Agreement

sebagai contoh General Motor Contract

Maintenance Agreement Directory

Maintenance Agreement Directory

Computer and Telcom Contract

Maintenance Charges for Equipment shall commence on the date set
              forth in the relevant Service Request.  All Maintenance Charges
              shall be pro-rated to the last calendar day of the calendar
              quarter.  Thereafter, Customer shall be invoiced quarterly in
              advance.

Maintenance Agreement

This Maintenance Agreement ("Agreement") is entered into this 22 day of
May, 1998 ("Effective Date") by and between CORBIS CORPORATION, a Washington
corporation d/b/a/ DIGITAL STOCK with its principal place of business at 15395
S.E. 30th Place, Suite 300, Bellevue, Washington 98007 ("Corbis"), and GET
SMART, INC., a Delaware corporation d/b/a BUSY BOX PRODUCTIONS and MEDIA
NETWORK with its principal place of business at 701 Battery Street, 2nd
Floor, San Francisco, California 94111 ("Busy Box").

                 No maintenance or other services are ordered by execution of
                 this Agreement alone. For equipment to be covered hereby or
                 services ordered, an Equipment Schedule or similar document
                 shall be completed by Diebold and provided to subscriber. Such
                 Equipment Schedule shall further define the service plan or
                 services being provided. Each such Schedule is deemed a part
                 of this Agreement. In the event of conflict between an
                 Equipment Schedule and the provisions hereof, the provisions
                 of the Equipment Schedule shall control, except with respect
                 to paragraphs 6 and 7 hereof, which shall govern in the event
                 of any conflict with any other provision.

Kontrak Perusahaan

Kontrak Instalasi, Maintenance, Repair Pabrik , bangunan dan bagaimana tender document, price dan payment, format

Standard Filter

Standard filters are typically pleated paper or waste materials that provide only partial filtration.

Engineering Recycling

Do You Experience These Problems?
• Contaminates in Oil
• Moisture in Oil
• System Failure
• High Replacement Costs
• Disposal Cost
• Service Outages

Used Oil Recycling

Used motor oil, or “sump oil” should not be thrown away or poured down the drain. Although oil gets dirty, used oil can still be cleaned and reused. Recycled used oil can be used as an industrial burner fuel, hydraulic oil, incorporated into other products or re-refined back into new lubricating oil.
Using this oil reservoir in-stead of attempting to dry the oil in place results in such large energy savings that operation may be possible where it would be impossible to operate a vacuum system.

Demulsifier

Demulsifier : An additive that promotes oil-water separation in lubricants that are exposed to water or steam.

Demulsifying, oil & water separation; Dehydration and degassing; Remove out particles, residuals and other dirties in oil; Upgrade cloudy dark yellow color to be clean; Apply to hydraulic...

promotes adhesion of the oil droplets to the solids thus reducing the effective density difference between the oil and the water, and hindering oil-water separation.

Particle Oil Cleaner

Designed for hydraulic and lubricating systems with filtering .

Submicron particles, as well as larger contaminants, are trapped on cellulose collector inside stainless steel chamber. Components include positive displacement pump with integral relief valve as well as single inlet and discharge.

The Kleentek product line is an industry-leading, technologically advanced oil cleaning system that works electrostatically to purge oil of contaminants. Kleentek systems are used in the power generation, automotive assembly, injection molding, maritime and chemical refining industries, among others.

These contaminants are trapped on a cellulose collector inside a stainless steel chamber where they are collected and easily disposed. Each collector is made of disposable cellular fiber and is specially pleated to hold contaminants. Depending upon the application, a collector will furnish 2,000 to 10,000 hours of use before a replacement collector is required.